Buyer Guide Nov 13, 2026 4 min read

Hydraulic Breaker Impact Rate: BPM Chart for 15 Models

Hydraulic breaker impact rate for 15 LICH models, from 90 to 1,100 blows per minute, with blows per second, oil used per blow and how flow sets the rate.

All buyer guides
LC-75 silent hydraulic breaker

Hydraulic breaker impact rate is the number of blows the piston delivers each minute, written as BPM (blows per minute). Small breakers hit fast and light, and large ones slow and heavy: the LICH range runs from 600–1,100 BPM on the LC-40 to 90–130 BPM on the LC-230. This chart gives the hydraulic breaker impact rate of 15 models, converts it to blows per second, and adds our calculation of the oil each blow uses.

Hydraulic breaker impact rate chart

Model Excavator class Impact rate Blows per second Impact energy Oil flow Oil per blow at top rate
LC-40 1–1.5 t 600–1,100 BPM 10.0–18.3 204 J 15–30 L/min 27 mL
LC-45 1.5–2 t 600–1,100 BPM 10.0–18.3 280 J 20–40 L/min 36 mL
LC-53 3–5 t 600–1,100 BPM 10.0–18.3 406 J 20–50 L/min 45 mL
LC-68 6 t 500–990 BPM 8.3–16.5 1,016 J 40–60 L/min 61 mL
LC-75 7 t 450–980 BPM 7.5–16.3 1,835 J 50–90 L/min 92 mL
LC-100 12 t 350–700 BPM 5.8–11.7 3,102 J 80–110 L/min 157 mL
LC-135 20–25 t 350–500 BPM 5.8–8.3 6,190 J 100–150 L/min 300 mL
LC-140 20–25 t 350–450 BPM 5.8–7.5 6,485 J 120–180 L/min 400 mL
LC-150 25–30 t 280–400 BPM 4.7–6.7 9,380 J 130–190 L/min 475 mL
LC-155 25–30 t 200–300 BPM 3.3–5.0 10,930 J 180–240 L/min 800 mL
LC-165 30–36 t 150–300 BPM 2.5–5.0 13,200 J 190–260 L/min 867 mL
LC-175 36–40 t 120–200 BPM 2.0–3.3 15,500 J 200–250 L/min 1,250 mL
LC-195 42–55 t 100–140 BPM 1.7–2.3 25,490 J 250–320 L/min 2,286 mL
LC-200 45–55 t 100–140 BPM 1.7–2.3 29,700 J 260–340 L/min 2,429 mL
LC-230 60–80 t 90–130 BPM 1.5–2.2 49,800 J 330–430 L/min 3,308 mL

Figures from the LICH model specifications, read on 13 November 2026. Blows per second is BPM divided by 60. Oil per blow is our calculation: the top of the oil flow window divided by the top impact rate.

What the chart shows

  • The rate falls as size grows. The top rate drops from 1,100 BPM on the 40 mm LC-40 to 130 BPM on the 230 mm LC-230, about one eighth. In one second the LC-40 strikes up to 18 times and the LC-230 about twice.
  • Each blow uses far more oil. At the top of its window the LC-40 uses about 27 mL of oil per blow and the LC-230 about 3.3 L, roughly 120 times as much. That oil moves a heavier piston through a longer stroke, which is where the energy of a large breaker comes from.
  • The adjustment band differs by model. The LC-165 doubles its rate inside its window, from 150 to 300 BPM. The LC-140 moves from 350 to 450 BPM, under 30%.
  • Blows add up. One working hour at the top rate is 66,000 blows on the LC-40 and 7,800 on the LC-230. Every blow loads the tool, the bushings and the through bolts, which is why those checks belong in the daily maintenance routine.

What sets the hydraulic breaker impact rate

Oil flow sets it. More litres per minute fill the cylinder sooner, so the piston cycles faster. Inside the listed window, the hydraulic breaker impact rate rises and falls with the flow the excavator sends.

  • Flow below the window: the rate drops and the work slows.
  • Flow above the window: the breaker runs too fast and the oil heats up. Limit the flow at the carrier.
  • Irregular rate at the right flow: the cause is inside the breaker or in the return line. The troubleshooting guide lists the checks.

The flow rate and pressure chart gives each window in L/min and GPM.

Fast and light or slow and heavy

Rate and energy pull in opposite directions, as the chart shows. Light, fast blows suit thin concrete, asphalt and trench work. Heavy, slow blows split hard rock.

Job What matters Example
Thin concrete, asphalt, trench work A high impact rate LC-75: 450–980 BPM, 1,835 J
General demolition and mixed rock A balance of rate and energy LC-135: 350–500 BPM, 6,190 J
Hard rock and quarry work Energy per blow LC-200: 100–140 BPM, 29,700 J

Energy by model is covered in the impact energy guide.

Questions about hydraulic breaker impact rate

What does BPM mean on a hydraulic breaker?

Blows per minute: how many times the piston strikes the tool in one minute. It is also called impact frequency or blow rate.

Is a higher impact rate better?

For material that breaks under light blows, yes. For hard rock, the energy of each blow matters more than the count.

Why has my breaker slowed down?

Check the oil flow first. A flow below the model window lowers the hydraulic breaker impact rate. Then check the oil temperature and the return line.

How many blows per minute does a breaker for a 20 ton excavator deliver?

350–500 BPM on the LC-135 and 350–450 BPM on the LC-140.

Keep Comparing

Compare more breaker models and buyer guides related to this topic.

All guides
Get a Quote WhatsApp