42–55 t LC-195 Hydraulic Breaker for 42-55 Ton Excavator hydraulic breaker

LC-195 Hydraulic Breaker for 42-55 Ton Excavator

Carrier42–55 t
Impact energy25490 J
Oil flow250–320 L/min

Specifications

Carrier weight42–55 t
Impact energy25490 J
Oil flow250–320 L/min
Working pressure260–300 bar
Impact rate100–140 bpm
Operating weight5400 kg
Chisel diameter195 mm
Carrier classLarge excavators
StructuresTriangular (Side-Mounted), Tower (Top-Mounted), Silent (Box)

Carrier match depends on the excavator’s hydraulic flow and working pressure.

Available Structures

Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.

LC-195 overview

The LC-195 is a 195 mm chisel hydraulic breaker for 42–55 t excavators. It weighs 5,400 kg and runs on 250–320 L/min of oil at 260–300 bar. Each blow delivers 25,490 J, at 100–140 blows per minute. It is built in side type, top type and silent box bodies.

LC-195 in metric and imperial units

SpecificationMetricImperial
Excavator weight42–55 t92,594–121,254 lb
Chisel diameter195 mm7.68 in
Operating weight5,400 kg11,905 lb
Oil flow250–320 L/min66.0–84.5 US gal/min
Working pressure260–300 bar3,771–4,351 psi
Impact energy25,490 J18,800 ft·lbf

Does the LC-195 fit your excavator?

  • Carrier weight: 42–55 t operating weight. At 5,400 kg the breaker is 9.8% to 12.9% of that weight.
  • Oil flow: the breaker circuit has to supply 250–320 L/min.
  • Working pressure: 260–300 bar at the breaker.
  • Hydraulic power: 108 kW at the low end (250 L/min × 260 bar ÷ 600) and 160 kW at the top (320 L/min × 300 bar ÷ 600).

Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.

LC-195 against the next sizes

ModelExcavatorChiselWeightOil flowImpact energy
LC-17536–40 t175 mm3,757 kg200–250 L/min15,500 J
LC-19542–55 t195 mm5,400 kg250–320 L/min25,490 J
LC-20045–55 t200 mm6,388 kg260–340 L/min29,700 J

The LC-175 below it is 1,643 kg lighter and delivers 15,500 J per blow, 39% less than the LC-195. The LC-200 above it adds 988 kg and 17% more impact energy, and needs at least 260 L/min.

Chisel and wear parts for the LC-195

The LC-195 takes 195 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-195 when ordering hydraulic breaker parts.

Applications

Primary rock breakingquarryingminingheavy concrete demolition and trenching in hard ground.

LC-195 questions

What size excavator does the LC-195 fit?

The LC-195 fits 42–55 t excavators. The breaker circuit has to supply 250–320 L/min of oil at 260–300 bar.

What chisel size does the LC-195 use?

A 195 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-195 takes 195 mm tools.

How much does the LC-195 weigh?

The LC-195 has an operating weight of 5,400 kg. That is 9.8% to 12.9% of the weight of a 42–55 t excavator.

How hard does the LC-195 hit?

The LC-195 delivers 25,490 J of impact energy per blow at 100–140 blows per minute.

Is the LC-195 available as a silent box breaker?

Yes. The LC-195 is built in side type, top type and silent box bodies.

What is the next size up from the LC-195?

The LC-200 for 45–55 t excavators. It uses a 200 mm chisel and delivers 29,700 J per blow.

Why Buy From LICH

OEM / ODMCustom paint, nameplate, decals and packaging.
Export PackingPlywood case and pallet, ready for sea freight.
Spare PartsChisels, seal kits and wear parts as a starter bundle.
QC TestedPressure and impact checked before every shipment.

Factory profile, certificates and shipped-case references available on request — ask the sales team.

Need this model matched to your excavator?

Send carrier brand, tonnage, oil flow and destination port — the sales team confirms the fit before quoting.

Get a Quote WhatsApp