7 t LC-75 Hydraulic Breaker for 7 Ton Excavator hydraulic breaker

LC-75 Hydraulic Breaker for 7 Ton Excavator

Carrier7 t
Impact energy1835 J
Oil flow50–90 L/min

Specifications

Carrier weight7 t
Impact energy1835 J
Oil flow50–90 L/min
Working pressure120–150 bar
Impact rate450–980 bpm
Operating weight410 kg
Chisel diameter75 mm
Carrier classSmall & medium excavators
StructuresTriangular (Side-Mounted), Tower (Top-Mounted), Silent (Box), Concentric Type

Carrier match depends on the excavator’s hydraulic flow and working pressure.

Available Structures

Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.

LC-75 overview

The LC-75 is a 75 mm chisel hydraulic breaker for 7 t excavators. It weighs 410 kg and runs on 50–90 L/min of oil at 120–150 bar. Each blow delivers 1,835 J, at 450–980 blows per minute. It is built in side type, top type, silent box and concentric type bodies.

LC-75 in metric and imperial units

SpecificationMetricImperial
Excavator weight7 t15,432 lb
Chisel diameter75 mm2.95 in
Operating weight410 kg904 lb
Oil flow50–90 L/min13.2–23.8 US gal/min
Working pressure120–150 bar1,740–2,176 psi
Impact energy1,835 J1,353 ft·lbf

Does the LC-75 fit your excavator?

  • Carrier weight: 7 t operating weight. At 410 kg the breaker is 5.9% of that weight.
  • Oil flow: the breaker circuit has to supply 50–90 L/min.
  • Working pressure: 120–150 bar at the breaker.
  • Hydraulic power: 10 kW at the low end (50 L/min × 120 bar ÷ 600) and 23 kW at the top (90 L/min × 150 bar ÷ 600).

Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.

LC-75 against the next sizes

ModelExcavatorChiselWeightOil flowImpact energy
LC-686 t68 mm289 kg40–60 L/min1,016 J
LC-757 t75 mm410 kg50–90 L/min1,835 J
LC-10012 t100 mm841 kg80–110 L/min3,102 J

The LC-68 below it is 121 kg lighter and delivers 1,016 J per blow, 45% less than the LC-75. The LC-100 above it adds 431 kg and 69% more impact energy, and needs at least 80 L/min.

Chisel and wear parts for the LC-75

The LC-75 takes 75 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-75 when ordering hydraulic breaker parts.

Applications

Concrete demolitionsecondary rock breakingfoundation worktrenching and road construction.

LC-75 questions

What size excavator does the LC-75 fit?

The LC-75 fits 7 t excavators. The breaker circuit has to supply 50–90 L/min of oil at 120–150 bar.

What chisel size does the LC-75 use?

A 75 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-75 takes 75 mm tools.

How much does the LC-75 weigh?

The LC-75 has an operating weight of 410 kg. That is 5.9% of the weight of a 7 t excavator.

How hard does the LC-75 hit?

The LC-75 delivers 1,835 J of impact energy per blow at 450–980 blows per minute.

Is the LC-75 available as a silent box breaker?

Yes. The LC-75 is built in side type, top type, silent box and concentric type bodies.

What is the next size up from the LC-75?

The LC-100 for 12 t excavators. It uses a 100 mm chisel and delivers 3,102 J per blow.

Why Buy From LICH

OEM / ODMCustom paint, nameplate, decals and packaging.
Export PackingPlywood case and pallet, ready for sea freight.
Spare PartsChisels, seal kits and wear parts as a starter bundle.
QC TestedPressure and impact checked before every shipment.

Factory profile, certificates and shipped-case references available on request — ask the sales team.

Need this model matched to your excavator?

Send carrier brand, tonnage, oil flow and destination port — the sales team confirms the fit before quoting.

Get a Quote WhatsApp