12 t LC-100 Hydraulic Breaker for 12 Ton Excavator hydraulic breaker

LC-100 Hydraulic Breaker for 12 Ton Excavator

Carrier12 t
Impact energy3102 J
Oil flow80–110 L/min

Specifications

Carrier weight12 t
Impact energy3102 J
Oil flow80–110 L/min
Working pressure150–180 bar
Impact rate350–700 bpm
Operating weight841 kg
Chisel diameter100 mm
Carrier classSmall & medium excavators
StructuresTriangular (Side-Mounted), Tower (Top-Mounted), Silent (Box), Concentric Type

Carrier match depends on the excavator’s hydraulic flow and working pressure.

Available Structures

Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.

LC-100 overview

The LC-100 is a 100 mm chisel hydraulic breaker for 12 t excavators. It weighs 841 kg and runs on 80–110 L/min of oil at 150–180 bar. Each blow delivers 3,102 J, at 350–700 blows per minute. It is built in side type, top type, silent box and concentric type bodies.

LC-100 in metric and imperial units

SpecificationMetricImperial
Excavator weight12 t26,455 lb
Chisel diameter100 mm3.94 in
Operating weight841 kg1,854 lb
Oil flow80–110 L/min21.1–29.1 US gal/min
Working pressure150–180 bar2,176–2,611 psi
Impact energy3,102 J2,288 ft·lbf

Does the LC-100 fit your excavator?

  • Carrier weight: 12 t operating weight. At 841 kg the breaker is 7.0% of that weight.
  • Oil flow: the breaker circuit has to supply 80–110 L/min.
  • Working pressure: 150–180 bar at the breaker.
  • Hydraulic power: 20 kW at the low end (80 L/min × 150 bar ÷ 600) and 33 kW at the top (110 L/min × 180 bar ÷ 600).

Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.

LC-100 against the next sizes

ModelExcavatorChiselWeightOil flowImpact energy
LC-757 t75 mm410 kg50–90 L/min1,835 J
LC-10012 t100 mm841 kg80–110 L/min3,102 J
LC-13520–25 t135 mm1,671 kg100–150 L/min6,190 J

The LC-75 below it is 431 kg lighter and delivers 1,835 J per blow, 41% less than the LC-100. The LC-135 above it adds 830 kg and 100% more impact energy, and needs at least 100 L/min.

Chisel and wear parts for the LC-100

The LC-100 takes 100 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-100 when ordering hydraulic breaker parts.

Applications

Concrete demolitionsecondary rock breakingfoundation worktrenching and road construction.

LC-100 questions

What size excavator does the LC-100 fit?

The LC-100 fits 12 t excavators. The breaker circuit has to supply 80–110 L/min of oil at 150–180 bar.

What chisel size does the LC-100 use?

A 100 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-100 takes 100 mm tools.

How much does the LC-100 weigh?

The LC-100 has an operating weight of 841 kg. That is 7.0% of the weight of a 12 t excavator.

How hard does the LC-100 hit?

The LC-100 delivers 3,102 J of impact energy per blow at 350–700 blows per minute.

Is the LC-100 available as a silent box breaker?

Yes. The LC-100 is built in side type, top type, silent box and concentric type bodies.

What is the next size up from the LC-100?

The LC-135 for 20–25 t excavators. It uses a 135 mm chisel and delivers 6,190 J per blow.

Why Buy From LICH

OEM / ODMCustom paint, nameplate, decals and packaging.
Export PackingPlywood case and pallet, ready for sea freight.
Spare PartsChisels, seal kits and wear parts as a starter bundle.
QC TestedPressure and impact checked before every shipment.

Factory profile, certificates and shipped-case references available on request — ask the sales team.

Need this model matched to your excavator?

Send carrier brand, tonnage, oil flow and destination port — the sales team confirms the fit before quoting.

Get a Quote WhatsApp