Buyer Guide Nov 13, 2026 4 min read

Hydraulic Breaker Weight Chart: 15 Models in kg and lb

Hydraulic breaker weight for 15 LICH models, from 79 kg to 8,909 kg, in kg and lb, with each breaker’s share of excavator weight and how to use it for sizing.

All buyer guides
Row of finished hydraulic breakers in different sizes

Hydraulic breaker weight runs from 79 kg for a 1 t mini excavator to 8,909 kg for a 60–80 t machine in the LICH range, which is 174 lb to 19,641 lb. Weight is the first figure to check against your excavator, because the carrier has to hold the breaker at full reach and still press it into the material. This chart lists the hydraulic breaker weight of 15 models in kilograms and pounds, and adds our calculation of the share of the excavator’s weight each breaker represents.

Hydraulic breaker weight chart by model

Model Excavator class Breaker weight Weight in pounds Chisel diameter Share of excavator weight
LC-40 1–1.5 t 79 kg 174 lb 40 mm 5.3–7.9%
LC-45 1.5–2 t 105 kg 231 lb 45 mm 5.3–7.0%
LC-53 3–5 t 166 kg 366 lb 53 mm 3.3–5.5%
LC-68 6 t 289 kg 637 lb 68 mm 4.8%
LC-75 7 t 410 kg 904 lb 75 mm 5.9%
LC-100 12 t 841 kg 1,854 lb 100 mm 7.0%
LC-135 20–25 t 1,671 kg 3,684 lb 135 mm 6.7–8.4%
LC-140 20–25 t 1,977 kg 4,359 lb 140 mm 7.9–9.9%
LC-150 25–30 t 2,448 kg 5,397 lb 150 mm 8.2–9.8%
LC-155 25–30 t 2,739 kg 6,038 lb 155 mm 9.1–11.0%
LC-165 30–36 t 3,217 kg 7,092 lb 165 mm 8.9–10.7%
LC-175 36–40 t 3,757 kg 8,283 lb 175 mm 9.4–10.4%
LC-195 42–55 t 5,400 kg 11,905 lb 195 mm 9.8–12.9%
LC-200 45–55 t 6,388 kg 14,083 lb 200 mm 11.6–14.2%
LC-230 60–80 t 8,909 kg 19,641 lb 230 mm 11.1–14.8%

Figures from the LICH model specifications, read on 13 November 2026. Pounds are converted from kilograms (1 kg = 2.20462 lb). The share is the breaker weight divided by the excavator weight at each end of the listed class. Weights for the LC-35, LC-180 and LC-200F are confirmed with the quotation.

What the weight chart shows

  • The range is wide. The LC-230 weighs about 113 times as much as the LC-40. Over the same span the chisel diameter grows less than six times, from 40 mm to 230 mm.
  • Weight climbs faster than chisel size. Doubling the chisel diameter from 100 mm on the LC-100 to 200 mm on the LC-200 multiplies the weight by 7.6, from 841 kg to 6,388 kg.
  • Bigger excavators carry a bigger share. On 1 to 12 t machines the breaker is 3.3% to 7.9% of the excavator’s weight. On 20 to 40 t machines it is 6.7% to 11.0%, and on 42 to 80 t machines 9.8% to 14.8%.
  • Neighbouring models can differ a lot. The LC-135 and LC-140 fit the same 20–25 t class with chisels 5 mm apart, and the LC-140 is 306 kg heavier, 18% more.

Why hydraulic breaker weight matters

Three things depend on it.

  • Stability. The breaker hangs at the end of the arm in place of the bucket. One that is too heavy makes the excavator unsteady with the arm stretched out and loads the boom and arm pins.
  • Down-force. The excavator presses the tool onto the material before each blow. A carrier that is too light lifts its own tracks before the tool is loaded.
  • Transport and handling. The hydraulic breaker weight is added to the excavator on the trailer, and the stand and lifting gear have to be rated for it.

Weight is the first filter. Oil flow and working pressure decide the rest: see the hydraulic breaker flow rate chart and the matching guide.

How to use hydraulic breaker weight for sizing

  1. Find the operating weight of your excavator on the nameplate or in the manual.
  2. Pick the row whose excavator class contains it. If it falls between two rows, note both.
  3. Work out the share: breaker weight divided by excavator weight. Compare it with the last column.
  4. Confirm oil flow and pressure, then the bracket and pin size.

Example: a 22 t excavator. The LC-135 weighs 1,671 kg, 7.6% of the machine. The LC-140 weighs 1,977 kg, 9.0%. Both sit inside their listed ranges, so the oil flow and the job decide: 100–150 L/min suits the LC-135 and 120–180 L/min the LC-140.

Questions about hydraulic breaker weight

How much does a hydraulic breaker weigh?

From 79 kg (174 lb) to 8,909 kg (19,641 lb) across the 15 LICH models in the chart.

How much does a breaker for a 20 ton excavator weigh?

The LC-135 weighs 1,671 kg (3,684 lb) and the LC-140 weighs 1,977 kg (4,359 lb). Both are listed for 20–25 t excavators.

What is the heaviest LICH hydraulic breaker?

The LC-230: 8,909 kg, a 230 mm chisel, for 60–80 t excavators.

Is a heavier hydraulic breaker more powerful?

Yes, and energy rises faster than weight. The LC-40 delivers 204 J from 79 kg and the LC-230 delivers 49,800 J from 8,909 kg. The impact energy guide compares energy per kilogram for each model.

Keep Comparing

Compare more breaker models and buyer guides related to this topic.

All guides
Get a Quote WhatsApp