LC-45 Hydraulic Breaker for 1.5-2 Ton Excavator
Specifications
Carrier match depends on the excavator’s hydraulic flow and working pressure.
Available Structures
Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.
LC-45 overview
The LC-45 is a 45 mm chisel hydraulic breaker for 1.5–2 t excavators. It weighs 105 kg and runs on 20–40 L/min of oil at 90–120 bar. Each blow delivers 280 J, at 600–1,100 blows per minute. It is built in side type, top type, silent box and concentric type bodies.
LC-45 in metric and imperial units
| Specification | Metric | Imperial |
|---|---|---|
| Excavator weight | 1.5–2 t | 3,307–4,409 lb |
| Chisel diameter | 45 mm | 1.77 in |
| Operating weight | 105 kg | 231 lb |
| Oil flow | 20–40 L/min | 5.3–10.6 US gal/min |
| Working pressure | 90–120 bar | 1,305–1,740 psi |
| Impact energy | 280 J | 207 ft·lbf |
Does the LC-45 fit your excavator?
- Carrier weight: 1.5–2 t operating weight. At 105 kg the breaker is 5.3% to 7.0% of that weight.
- Oil flow: the breaker circuit has to supply 20–40 L/min.
- Working pressure: 90–120 bar at the breaker.
- Hydraulic power: 3 kW at the low end (20 L/min × 90 bar ÷ 600) and 8 kW at the top (40 L/min × 120 bar ÷ 600).
Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.
LC-45 against the next sizes
| Model | Excavator | Chisel | Weight | Oil flow | Impact energy |
|---|---|---|---|---|---|
| LC-40 | 1–1.5 t | 40 mm | 79 kg | 15–30 L/min | 204 J |
| LC-45 | 1.5–2 t | 45 mm | 105 kg | 20–40 L/min | 280 J |
| LC-53 | 3–5 t | 53 mm | 166 kg | 20–50 L/min | 406 J |
The LC-40 below it is 26 kg lighter and delivers 204 J per blow, 27% less than the LC-45. The LC-53 above it adds 61 kg and 45% more impact energy, and needs at least 20 L/min.
Chisel and wear parts for the LC-45
The LC-45 takes 45 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-45 when ordering hydraulic breaker parts.
Applications
LC-45 questions
What size excavator does the LC-45 fit?
The LC-45 fits 1.5–2 t excavators. The breaker circuit has to supply 20–40 L/min of oil at 90–120 bar.
What chisel size does the LC-45 use?
A 45 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-45 takes 45 mm tools.
How much does the LC-45 weigh?
The LC-45 has an operating weight of 105 kg. That is 5.3% to 7.0% of the weight of a 1.5–2 t excavator.
How hard does the LC-45 hit?
The LC-45 delivers 280 J of impact energy per blow at 600–1,100 blows per minute.
Is the LC-45 available as a silent box breaker?
Yes. The LC-45 is built in side type, top type, silent box and concentric type bodies.
What is the next size up from the LC-45?
The LC-53 for 3–5 t excavators. It uses a 53 mm chisel and delivers 406 J per blow.
Why Buy From LICH
Factory profile, certificates and shipped-case references available on request — ask the sales team.
