LC-200 Hydraulic Breaker for 45-55 Ton Excavator
Specifications
Carrier match depends on the excavator’s hydraulic flow and working pressure.
Available Structures
Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.
LC-200 overview
The LC-200 is a 200 mm chisel hydraulic breaker for 45–55 t excavators. It weighs 6,388 kg and runs on 260–340 L/min of oil at 260–300 bar. Each blow delivers 29,700 J, at 100–140 blows per minute. It is built in side type, top type, silent box and concentric type bodies.
LC-200 in metric and imperial units
| Specification | Metric | Imperial |
|---|---|---|
| Excavator weight | 45–55 t | 99,208–121,254 lb |
| Chisel diameter | 200 mm | 7.87 in |
| Operating weight | 6,388 kg | 14,083 lb |
| Oil flow | 260–340 L/min | 68.7–89.8 US gal/min |
| Working pressure | 260–300 bar | 3,771–4,351 psi |
| Impact energy | 29,700 J | 21,906 ft·lbf |
Does the LC-200 fit your excavator?
- Carrier weight: 45–55 t operating weight. At 6,388 kg the breaker is 11.6% to 14.2% of that weight.
- Oil flow: the breaker circuit has to supply 260–340 L/min.
- Working pressure: 260–300 bar at the breaker.
- Hydraulic power: 113 kW at the low end (260 L/min × 260 bar ÷ 600) and 170 kW at the top (340 L/min × 300 bar ÷ 600).
Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.
LC-200 against the next sizes
| Model | Excavator | Chisel | Weight | Oil flow | Impact energy |
|---|---|---|---|---|---|
| LC-195 | 42–55 t | 195 mm | 5,400 kg | 250–320 L/min | 25,490 J |
| LC-200 | 45–55 t | 200 mm | 6,388 kg | 260–340 L/min | 29,700 J |
| LC-230 | 60–80 t | 230 mm | 8,909 kg | 330–430 L/min | 49,800 J |
The LC-195 below it is 988 kg lighter and delivers 25,490 J per blow, 14% less than the LC-200. The LC-230 above it adds 2,521 kg and 68% more impact energy, and needs at least 330 L/min.
Chisel and wear parts for the LC-200
The LC-200 takes 200 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-200 when ordering hydraulic breaker parts.
Applications
LC-200 questions
What size excavator does the LC-200 fit?
The LC-200 fits 45–55 t excavators. The breaker circuit has to supply 260–340 L/min of oil at 260–300 bar.
What chisel size does the LC-200 use?
A 200 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-200 takes 200 mm tools.
How much does the LC-200 weigh?
The LC-200 has an operating weight of 6,388 kg. That is 11.6% to 14.2% of the weight of a 45–55 t excavator.
How hard does the LC-200 hit?
The LC-200 delivers 29,700 J of impact energy per blow at 100–140 blows per minute.
Is the LC-200 available as a silent box breaker?
Yes. The LC-200 is built in side type, top type, silent box and concentric type bodies.
What is the next size up from the LC-200?
The LC-230 for 60–80 t excavators. It uses a 230 mm chisel and delivers 49,800 J per blow.
Why Buy From LICH
Factory profile, certificates and shipped-case references available on request — ask the sales team.
