6 t LC-68 Hydraulic Breaker for 6 Ton Excavator hydraulic breaker

LC-68 Hydraulic Breaker for 6 Ton Excavator

Carrier6 t
Impact energy1016 J
Oil flow40–60 L/min

Specifications

Carrier weight6 t
Impact energy1016 J
Oil flow40–60 L/min
Working pressure90–130 bar
Impact rate500–990 bpm
Operating weight289 kg
Chisel diameter68 mm
Carrier classMini & small excavators
StructuresTriangular (Side-Mounted), Tower (Top-Mounted), Silent (Box), Concentric Type

Carrier match depends on the excavator’s hydraulic flow and working pressure.

Available Structures

Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.

LC-68 overview

The LC-68 is a 68 mm chisel hydraulic breaker for 6 t excavators. It weighs 289 kg and runs on 40–60 L/min of oil at 90–130 bar. Each blow delivers 1,016 J, at 500–990 blows per minute. It is built in side type, top type, silent box and concentric type bodies.

LC-68 in metric and imperial units

SpecificationMetricImperial
Excavator weight6 t13,228 lb
Chisel diameter68 mm2.68 in
Operating weight289 kg637 lb
Oil flow40–60 L/min10.6–15.9 US gal/min
Working pressure90–130 bar1,305–1,885 psi
Impact energy1,016 J749 ft·lbf

Does the LC-68 fit your excavator?

  • Carrier weight: 6 t operating weight. At 289 kg the breaker is 4.8% of that weight.
  • Oil flow: the breaker circuit has to supply 40–60 L/min.
  • Working pressure: 90–130 bar at the breaker.
  • Hydraulic power: 6 kW at the low end (40 L/min × 90 bar ÷ 600) and 13 kW at the top (60 L/min × 130 bar ÷ 600).

Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.

LC-68 against the next sizes

ModelExcavatorChiselWeightOil flowImpact energy
LC-533–5 t53 mm166 kg20–50 L/min406 J
LC-686 t68 mm289 kg40–60 L/min1,016 J
LC-757 t75 mm410 kg50–90 L/min1,835 J

The LC-53 below it is 123 kg lighter and delivers 406 J per blow, 60% less than the LC-68. The LC-75 above it adds 121 kg and 81% more impact energy, and needs at least 50 L/min.

Chisel and wear parts for the LC-68

The LC-68 takes 68 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-68 when ordering hydraulic breaker parts.

Applications

Urban demolitionfoundation excavationroad and pavement breakinglight trenching.

LC-68 questions

What size excavator does the LC-68 fit?

The LC-68 fits 6 t excavators. The breaker circuit has to supply 40–60 L/min of oil at 90–130 bar.

What chisel size does the LC-68 use?

A 68 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-68 takes 68 mm tools.

How much does the LC-68 weigh?

The LC-68 has an operating weight of 289 kg. That is 4.8% of the weight of a 6 t excavator.

How hard does the LC-68 hit?

The LC-68 delivers 1,016 J of impact energy per blow at 500–990 blows per minute.

Is the LC-68 available as a silent box breaker?

Yes. The LC-68 is built in side type, top type, silent box and concentric type bodies.

What is the next size up from the LC-68?

The LC-75 for 7 t excavators. It uses a 75 mm chisel and delivers 1,835 J per blow.

Why Buy From LICH

OEM / ODMCustom paint, nameplate, decals and packaging.
Export PackingPlywood case and pallet, ready for sea freight.
Spare PartsChisels, seal kits and wear parts as a starter bundle.
QC TestedPressure and impact checked before every shipment.

Factory profile, certificates and shipped-case references available on request — ask the sales team.

Need this model matched to your excavator?

Send carrier brand, tonnage, oil flow and destination port — the sales team confirms the fit before quoting.

Get a Quote WhatsApp