30–36 t LC-165 Hydraulic Breaker for 30-36 Ton Excavator hydraulic breaker

LC-165 Hydraulic Breaker for 30-36 Ton Excavator

Carrier30–36 t
Impact energy13200 J
Oil flow190–260 L/min

Specifications

Carrier weight30–36 t
Impact energy13200 J
Oil flow190–260 L/min
Working pressure200–240 bar
Impact rate150–300 bpm
Operating weight3217 kg
Chisel diameter165 mm
Carrier classMedium & large excavators
StructuresTriangular (Side-Mounted), Tower (Top-Mounted), Silent (Box)

Carrier match depends on the excavator’s hydraulic flow and working pressure.

Available Structures

Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.

LC-165 overview

The LC-165 is a 165 mm chisel hydraulic breaker for 30–36 t excavators. It weighs 3,217 kg and runs on 190–260 L/min of oil at 200–240 bar. Each blow delivers 13,200 J, at 150–300 blows per minute. It is built in side type, top type and silent box bodies.

LC-165 in metric and imperial units

SpecificationMetricImperial
Excavator weight30–36 t66,139–79,366 lb
Chisel diameter165 mm6.50 in
Operating weight3,217 kg7,092 lb
Oil flow190–260 L/min50.2–68.7 US gal/min
Working pressure200–240 bar2,901–3,481 psi
Impact energy13,200 J9,736 ft·lbf

Does the LC-165 fit your excavator?

  • Carrier weight: 30–36 t operating weight. At 3,217 kg the breaker is 8.9% to 10.7% of that weight.
  • Oil flow: the breaker circuit has to supply 190–260 L/min.
  • Working pressure: 200–240 bar at the breaker.
  • Hydraulic power: 63 kW at the low end (190 L/min × 200 bar ÷ 600) and 104 kW at the top (260 L/min × 240 bar ÷ 600).

Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.

LC-165 against the next sizes

ModelExcavatorChiselWeightOil flowImpact energy
LC-15525–30 t155 mm2,739 kg180–240 L/min10,930 J
LC-16530–36 t165 mm3,217 kg190–260 L/min13,200 J
LC-17536–40 t175 mm3,757 kg200–250 L/min15,500 J

The LC-155 below it is 478 kg lighter and delivers 10,930 J per blow, 17% less than the LC-165. The LC-175 above it adds 540 kg and 17% more impact energy, and needs at least 200 L/min.

Chisel and wear parts for the LC-165

The LC-165 takes 165 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-165 when ordering hydraulic breaker parts.

Applications

Rock breakingfoundation excavationdemolitionquarrying and road construction.

LC-165 questions

What size excavator does the LC-165 fit?

The LC-165 fits 30–36 t excavators. The breaker circuit has to supply 190–260 L/min of oil at 200–240 bar.

What chisel size does the LC-165 use?

A 165 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-165 takes 165 mm tools.

How much does the LC-165 weigh?

The LC-165 has an operating weight of 3,217 kg. That is 8.9% to 10.7% of the weight of a 30–36 t excavator.

How hard does the LC-165 hit?

The LC-165 delivers 13,200 J of impact energy per blow at 150–300 blows per minute.

Is the LC-165 available as a silent box breaker?

Yes. The LC-165 is built in side type, top type and silent box bodies.

What is the next size up from the LC-165?

The LC-175 for 36–40 t excavators. It uses a 175 mm chisel and delivers 15,500 J per blow.

Why Buy From LICH

OEM / ODMCustom paint, nameplate, decals and packaging.
Export PackingPlywood case and pallet, ready for sea freight.
Spare PartsChisels, seal kits and wear parts as a starter bundle.
QC TestedPressure and impact checked before every shipment.

Factory profile, certificates and shipped-case references available on request — ask the sales team.

Need this model matched to your excavator?

Send carrier brand, tonnage, oil flow and destination port — the sales team confirms the fit before quoting.

Get a Quote WhatsApp