LC-175 Hydraulic Breaker for 36-40 Ton Excavator
Specifications
Carrier match depends on the excavator’s hydraulic flow and working pressure.
Available Structures
Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.
LC-175 overview
The LC-175 is a 175 mm chisel hydraulic breaker for 36–40 t excavators. It weighs 3,757 kg and runs on 200–250 L/min of oil at 210–240 bar. Each blow delivers 15,500 J, at 120–200 blows per minute. It is built in side type, top type and silent box bodies.
LC-175 in metric and imperial units
| Specification | Metric | Imperial |
|---|---|---|
| Excavator weight | 36–40 t | 79,366–88,185 lb |
| Chisel diameter | 175 mm | 6.89 in |
| Operating weight | 3,757 kg | 8,283 lb |
| Oil flow | 200–250 L/min | 52.8–66.0 US gal/min |
| Working pressure | 210–240 bar | 3,046–3,481 psi |
| Impact energy | 15,500 J | 11,432 ft·lbf |
Does the LC-175 fit your excavator?
- Carrier weight: 36–40 t operating weight. At 3,757 kg the breaker is 9.4% to 10.4% of that weight.
- Oil flow: the breaker circuit has to supply 200–250 L/min.
- Working pressure: 210–240 bar at the breaker.
- Hydraulic power: 70 kW at the low end (200 L/min × 210 bar ÷ 600) and 100 kW at the top (250 L/min × 240 bar ÷ 600).
Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.
LC-175 against the next sizes
| Model | Excavator | Chisel | Weight | Oil flow | Impact energy |
|---|---|---|---|---|---|
| LC-165 | 30–36 t | 165 mm | 3,217 kg | 190–260 L/min | 13,200 J |
| LC-175 | 36–40 t | 175 mm | 3,757 kg | 200–250 L/min | 15,500 J |
| LC-195 | 42–55 t | 195 mm | 5,400 kg | 250–320 L/min | 25,490 J |
The LC-165 below it is 540 kg lighter and delivers 13,200 J per blow, 15% less than the LC-175. The LC-195 above it adds 1,643 kg and 64% more impact energy, and needs at least 250 L/min.
Chisel and wear parts for the LC-175
The LC-175 takes 175 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-175 when ordering hydraulic breaker parts.
Applications
LC-175 questions
What size excavator does the LC-175 fit?
The LC-175 fits 36–40 t excavators. The breaker circuit has to supply 200–250 L/min of oil at 210–240 bar.
What chisel size does the LC-175 use?
A 175 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-175 takes 175 mm tools.
How much does the LC-175 weigh?
The LC-175 has an operating weight of 3,757 kg. That is 9.4% to 10.4% of the weight of a 36–40 t excavator.
How hard does the LC-175 hit?
The LC-175 delivers 15,500 J of impact energy per blow at 120–200 blows per minute.
Is the LC-175 available as a silent box breaker?
Yes. The LC-175 is built in side type, top type and silent box bodies.
What is the next size up from the LC-175?
The LC-195 for 42–55 t excavators. It uses a 195 mm chisel and delivers 25,490 J per blow.
Why Buy From LICH
Factory profile, certificates and shipped-case references available on request — ask the sales team.
