60–80 t LC-230 Hydraulic Breaker for 60-80 Ton Excavator hydraulic breaker

LC-230 Hydraulic Breaker for 60-80 Ton Excavator

Carrier60–80 t
Impact energy49800 J
Oil flow330–430 L/min

Specifications

Carrier weight60–80 t
Impact energy49800 J
Oil flow330–430 L/min
Working pressure260–300 bar
Impact rate90–130 bpm
Operating weight8909 kg
Chisel diameter230 mm
Carrier classSuper-large excavators
StructuresTriangular (Side-Mounted), Silent (Box)

Carrier match depends on the excavator’s hydraulic flow and working pressure.

Available Structures

Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.

LC-230 overview

The LC-230 is a 230 mm chisel hydraulic breaker for 60–80 t excavators. It weighs 8,909 kg and runs on 330–430 L/min of oil at 260–300 bar. Each blow delivers 49,800 J, at 90–130 blows per minute. It is built in side type and silent box bodies.

LC-230 in metric and imperial units

SpecificationMetricImperial
Excavator weight60–80 t132,277–176,370 lb
Chisel diameter230 mm9.06 in
Operating weight8,909 kg19,641 lb
Oil flow330–430 L/min87.2–113.6 US gal/min
Working pressure260–300 bar3,771–4,351 psi
Impact energy49,800 J36,731 ft·lbf

Does the LC-230 fit your excavator?

  • Carrier weight: 60–80 t operating weight. At 8,909 kg the breaker is 11.1% to 14.8% of that weight.
  • Oil flow: the breaker circuit has to supply 330–430 L/min.
  • Working pressure: 260–300 bar at the breaker.
  • Hydraulic power: 143 kW at the low end (330 L/min × 260 bar ÷ 600) and 215 kW at the top (430 L/min × 300 bar ÷ 600).

Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.

LC-230 against the next sizes

ModelExcavatorChiselWeightOil flowImpact energy
LC-20045–55 t200 mm6,388 kg260–340 L/min29,700 J
LC-23060–80 t230 mm8,909 kg330–430 L/min49,800 J

The LC-200 below it is 2,521 kg lighter and delivers 29,700 J per blow, 40% less than the LC-230.

Chisel and wear parts for the LC-230

The LC-230 takes 230 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-230 when ordering hydraulic breaker parts.

Applications

Open-pit miningheavy rock breakinglarge reinforced-concrete demolition

LC-230 questions

What size excavator does the LC-230 fit?

The LC-230 fits 60–80 t excavators. The breaker circuit has to supply 330–430 L/min of oil at 260–300 bar.

What chisel size does the LC-230 use?

A 230 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-230 takes 230 mm tools.

How much does the LC-230 weigh?

The LC-230 has an operating weight of 8,909 kg. That is 11.1% to 14.8% of the weight of a 60–80 t excavator.

How hard does the LC-230 hit?

The LC-230 delivers 49,800 J of impact energy per blow at 90–130 blows per minute.

Is the LC-230 available as a silent box breaker?

Yes. The LC-230 is built in side type and silent box bodies.

Why Buy From LICH

OEM / ODMCustom paint, nameplate, decals and packaging.
Export PackingPlywood case and pallet, ready for sea freight.
Spare PartsChisels, seal kits and wear parts as a starter bundle.
QC TestedPressure and impact checked before every shipment.

Factory profile, certificates and shipped-case references available on request — ask the sales team.

Need this model matched to your excavator?

Send carrier brand, tonnage, oil flow and destination port — the sales team confirms the fit before quoting.

Get a Quote WhatsApp