LC-150 Hydraulic Breaker for 25-30 Ton Excavator
Specifications
Carrier match depends on the excavator’s hydraulic flow and working pressure.
Available Structures
Same hydraulic platform, different housing — pick the structure that matches your site and carrier mounting. Weight varies slightly by housing.
LC-150 overview
The LC-150 is a 150 mm chisel hydraulic breaker for 25–30 t excavators. It weighs 2,448 kg and runs on 130–190 L/min of oil at 170–190 bar. Each blow delivers 9,380 J, at 280–400 blows per minute. It is built in side type, top type and silent box bodies.
LC-150 in metric and imperial units
| Specification | Metric | Imperial |
|---|---|---|
| Excavator weight | 25–30 t | 55,116–66,139 lb |
| Chisel diameter | 150 mm | 5.91 in |
| Operating weight | 2,448 kg | 5,397 lb |
| Oil flow | 130–190 L/min | 34.3–50.2 US gal/min |
| Working pressure | 170–190 bar | 2,466–2,756 psi |
| Impact energy | 9,380 J | 6,918 ft·lbf |
Does the LC-150 fit your excavator?
- Carrier weight: 25–30 t operating weight. At 2,448 kg the breaker is 8.2% to 9.8% of that weight.
- Oil flow: the breaker circuit has to supply 130–190 L/min.
- Working pressure: 170–190 bar at the breaker.
- Hydraulic power: 37 kW at the low end (130 L/min × 170 bar ÷ 600) and 60 kW at the top (190 L/min × 190 bar ÷ 600).
Send the excavator brand and model with its auxiliary flow and pressure, and we check these four figures against your machine before quoting. The full method is in the hydraulic breaker matching guide.
LC-150 against the next sizes
| Model | Excavator | Chisel | Weight | Oil flow | Impact energy |
|---|---|---|---|---|---|
| LC-140 | 20–25 t | 140 mm | 1,977 kg | 120–180 L/min | 6,485 J |
| LC-150 | 25–30 t | 150 mm | 2,448 kg | 130–190 L/min | 9,380 J |
| LC-155 | 25–30 t | 155 mm | 2,739 kg | 180–240 L/min | 10,930 J |
The LC-140 below it is 471 kg lighter and delivers 6,485 J per blow, 31% less than the LC-150. The LC-155 above it adds 291 kg and 17% more impact energy, and needs at least 180 L/min.
Chisel and wear parts for the LC-150
The LC-150 takes 150 mm tools. See chisel sizes and shapes. Chisel pins, bushings, seal kits and through bolts are matched by model, so quote LC-150 when ordering hydraulic breaker parts.
Applications
LC-150 questions
What size excavator does the LC-150 fit?
The LC-150 fits 25–30 t excavators. The breaker circuit has to supply 130–190 L/min of oil at 170–190 bar.
What chisel size does the LC-150 use?
A 150 mm diameter chisel. In the LC range the model number is the chisel diameter in millimetres, so the LC-150 takes 150 mm tools.
How much does the LC-150 weigh?
The LC-150 has an operating weight of 2,448 kg. That is 8.2% to 9.8% of the weight of a 25–30 t excavator.
How hard does the LC-150 hit?
The LC-150 delivers 9,380 J of impact energy per blow at 280–400 blows per minute.
Is the LC-150 available as a silent box breaker?
Yes. The LC-150 is built in side type, top type and silent box bodies.
What is the next size up from the LC-150?
The LC-155 for 25–30 t excavators. It uses a 155 mm chisel and delivers 10,930 J per blow.
Why Buy From LICH
Factory profile, certificates and shipped-case references available on request — ask the sales team.
