Hydraulic Breaker Bits and Chisels
Find the chisel diameter for every LICH breaker in the size chart, pick the tool shape for your material, then send the model and length for a quote on hydraulic breaker bits.
Use this page to compare hydraulic breaker chisel shapes and request a replacement tool by exact breaker model, diameter, length, retainer details, work material and quantity.
Match by model and diameter
Give the breaker model, serial record, tool diameter, length and clear photos, and LICH matches the replacement tool to it. The LC model number is the chisel diameter in mm.
Shape follows the breaking task
Wedge, cone or pyramid, flat or blunt and wide tools introduce impact differently. Select by material and intended fracture route, not by appearance alone.
Wear photos speed up the quote
Photograph the full tool, working end, retainer area and measured diameter. Uneven wear shows where bushings or working angle need attention.
Two steel grades
LICH supplies hydraulic breaker bits in 40Cr standard and 42CrMo upgraded steel for every model, with material, heat treatment, packing and lead time listed in the quotation.
Hydraulic Breaker Bits Size Chart
Chisel diameter and excavator class for every LICH hydraulic breaker. The LC model number equals the chisel diameter in mm, so an LC-140 takes a 140 mm tool.
| Model | Chisel diameter | Excavator class | Breaker weight |
|---|---|---|---|
| LC-35 | 35 mm | 1–1.5 t | — |
| LC-40 | 40 mm | 1–1.5 t | 79 kg |
| LC-45 | 45 mm | 1.5–2 t | 105 kg |
| LC-53 | 53 mm | 3–5 t | 166 kg |
| LC-68 | 68 mm | 6 t | 289 kg |
| LC-75 | 75 mm | 7 t | 410 kg |
| LC-100 | 100 mm | 12 t | 841 kg |
| LC-135 | 135 mm | 20–25 t | 1,671 kg |
| LC-140 | 140 mm | 20–25 t | 1,977 kg |
| LC-150 | 150 mm | 25–30 t | 2,448 kg |
| LC-155 | 155 mm | 25–30 t | 2,739 kg |
| LC-165 | 165 mm | 30–36 t | 3,217 kg |
| LC-175 | 175 mm | 36–40 t | 3,757 kg |
| LC-180 | 180 mm | — | — |
| LC-195 | 195 mm | 42–55 t | 5,400 kg |
| LC-200 | 200 mm | 45–55 t | 6,388 kg |
| LC-200F | 200 mm | 45–55 t | — |
| LC-230 | 230 mm | 60–80 t | 8,909 kg |
Hydraulic Breaker Bits: Chisel Shapes
Names vary by market. Pick the shape by the material you break and the way you want it to split.
Wedge chisel
A wedge edge splits and cuts in one direction: trenching, cutting slabs and breaking layered rock. Set the edge across the line you want to split.
Cone or pyramid point
A concentrated point starts penetration and fracture in rock and concrete. It is the usual first choice for general breaking and foundations.
Flat or blunt tool
A broad working end spreads impact over a larger contact area, which suits secondary breaking of boulders and oversize blocks that crush rather than cut.
Wide chisel
A wide edge cuts asphalt, finishes trench walls and handles surface work.
How to Match Replacement Hydraulic Breaker Bits
Use a measurement-and-photo record before comparing a quotation.
Identify the breaker
Record the full model, serial number, body type and nameplate information. The size chart above gives the chisel diameter for every LC model.
Measure the tool
Record diameter, total length, retainer area and other supplier-requested dimensions with a clear unit and measurement photo.
Choose the working end
Describe the material, application, access and expected duty so wedge, point, flat or wide options can be discussed.
Review wear proof
Send photos of the working end, shank and retainer area. Record unusual wear, breakage, seizure or bushing concerns.
Confirm supply in writing
Confirm material option, heat treatment if stated, quantity, packing, destination, delivery timing and warranty boundary in the quotation.
Hydraulic Breaker Bits Quote Checklist
A complete request lets LICH quote the exact tool the first time.
Reading Wear on Hydraulic Breaker Bits
Record why the current tool is being replaced; the wear pattern points to the fix.
Normal working-end wear
Record the remaining shape and whether performance changed gradually. Normal wear is different from sudden breakage or a fit problem.
Uneven or side wear
Review tool alignment, bushing condition, side loading and operating method before treating the issue as only a replacement-parts question.
Retainer-area damage
Stop and document the tool, pins, bushings and breaker model. Correct identification and service review are required before continuing.
Sudden breakage or seizure
Stop operation, secure the machine and collect photos, working hours, material, lubrication and operating proof for trained diagnosis.
Frequently Asked Questions
Plain answers before the first quote.
Yes. Chisel, tool, moil point and breaker bit all name the working tool fitted to a hydraulic breaker; the different names usually describe the end shape. Order by breaker model and diameter.
On LICH breakers the model number is the chisel diameter: an LC-68 uses a 68 mm chisel and an LC-140 a 140 mm chisel. The size chart on this page lists every model with its excavator class.
A moil or pyramid point for general rock and concrete, a wedge for directional splitting and trenching, a blunt tool for boulders and oversize blocks, and a wide chisel for asphalt and surface work.
Correct material and heat treatment, a good fit in fresh bushings, regular chisel paste, a 90° working angle and short strike cycles. LICH supplies 40Cr standard and 42CrMo upgraded chisels for each model.
Send the breaker nameplate, full breaker, full tool, diameter and length measurements, retainer area, working end, wear close-ups and work material.
Yes. Add spare hydraulic breaker bits and a starter parts kit to the breaker order and they ship in the same packing.
Continue Through the Hydraulic Breaker Guides
Use the next topic that matches your selection, operation, parts or support question.
Hydraulic breaker guide hub
Return to the complete selection, application, maintenance and support path.
View detailsSpare parts and support
Prepare a complete parts request for tools, seals, hoses, bolts, bushings and diagnosed parts.
View detailsRepair and troubleshooting
Review abnormal wear, leakage, weak impact and no-impact proof before ordering internal parts.
View detailsHydraulic concrete breaker
Connect tool selection to concrete condition, carrier data and working practice.
View detailsReady to check the right breaker?
Send carrier model, hydraulic data, quantity and destination port. LICH can reply with a checked model path.
