Hydraulic Breaker for 8 Ton Excavator: Why the LC-75 Fits
Which hydraulic breaker for an 8 ton excavator? Compare the LC-68, LC-75 and LC-100 by oil flow, pressure, energy and share of machine weight before ordering.
All buyer guides
An 8 ton excavator sits between two LICH classes: the LC-75 listed for 7 t carriers and the LC-100 listed for 12 t carriers. For most 8 t machines the hydraulic breaker for 8 ton excavator work is the LC-75, and the auxiliary circuit confirms it. This guide compares the sizes either side, shows the share of machine weight each one takes and explains when another size makes sense.
The three sizes around an 8 t machine
| Model | Excavator class | Breaker weight | Chisel diameter | Oil flow | Working pressure | Impact rate | Impact energy |
|---|---|---|---|---|---|---|---|
| LC-68 | 6 t | 289 kg | 68 mm | 40–60 L/min | 90–130 bar | 500–990 bpm | 1,016 J |
| LC-75 | 7 t | 410 kg | 75 mm | 50–90 L/min | 120–150 bar | 450–980 bpm | 1,835 J |
| LC-100 | 12 t | 841 kg | 100 mm | 80–110 L/min | 150–180 bar | 350–700 bpm | 3,102 J |
Figures from the LICH model specifications, read on 5 November 2026.
Weight on the arm of an 8 t excavator
We divided each breaker’s weight by 8,000 kg:
- LC-68 (289 kg): 3.6% of the machine.
- LC-75 (410 kg): 5.1% of the machine.
- LC-100 (841 kg): 10.5% of the machine, with more than twice the LC-75’s weight at the end of the arm.
The LC-75 leaves the arm comfortable at reach and on slopes. The LC-100 is listed for 12 t carriers, so it suits heavier machines.
What the circuit decides
- Below 50 L/min: the LC-68 runs on 40–60 L/min at 90–130 bar and delivers 1,016 J.
- 50–90 L/min at 120–150 bar: the LC-75, with 1,835 J per blow, 81% more than the LC-68. This is the usual hydraulic breaker for 8 ton excavator circuits.
- 80–110 L/min at 150–180 bar: the LC-100 needs this flow and pressure, so check the circuit and the arm’s weight limit first. It delivers 3,102 J, 69% more than the LC-75.
Our matching guide shows how to read the flow and relief pressure from the machine.
Body and mounting
The LC-75 comes in silent box-type, tower, triangular and concentric bodies. The concentric LC-75 weighs 510 kg, 6.4% of an 8 t machine. Record the pin diameter, pin centres and bracket or quick-coupler type before ordering, and order the bracket with the breaker so your hydraulic breaker for 8 ton excavator use arrives ready to mount.
Jobs for an 8 t excavator breaker
- Concrete demolition and slab breaking.
- Secondary rock breaking and foundation work.
- Trenching and road construction.
Those are the uses listed for the LC-75. On a machine closer to 10 t, read the hydraulic breaker for 10 ton excavator guide; on a 3–5 t machine, the 5 ton excavator guide. For hard rock, see the best hydraulic rock breaker by job.
Questions about 8 ton excavator breakers
What size hydraulic breaker for 8 ton excavator work?
The LC-75: 410 kg, 75 mm chisel, 1,835 J, running on 50–90 L/min at 120–150 bar.
Is a hydraulic breaker for an 8t excavator the same as for a 7t one?
Yes. The LC-75 is listed for 7 t carriers and sits at 5.1% of an 8 t machine, so it fits both when the circuit is inside its window.
Which spares should I order?
A spare 75 mm chisel and a seal kit. See spare parts for a first order.
Send us your excavator model, circuit flow and pressure, and the main material. We will confirm the hydraulic breaker for 8 ton excavator use on your machine and quote it with the bracket, hoses and spare parts.
Keep Comparing
Compare more breaker models and buyer guides related to this topic.
